Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

IOSH Forums are closing 

The IOSH Forums will close on 5 January 2026 as part of a move to a new, more secure online community platform.

All IOSH members will be invited to join the new platform following the launch of a new member database in the New Year. You can continue to access this website until the closure date. 

For more information, please visit the IOSH website.

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 06 August 2007 19:03:00(UTC)
Rank: Guest
Admin

Posted By jiboom
i have recently dug a soakaway. I have gone down the required depth but at this depth is a clay shelf. The building inspector passed the dig when i was half way down. I have a friend who builds and he tells me i need to dig through the shelf as water will not soakaway but turn my garden marshy.
I can see what he is getting at but my question is this:
if i went down say 6ft but the clay shelf was at 6ft 1 inch i would not know about it. So should i be worried i have found the shelf at the depth i needed to dig, as if it was just 1 inch further down i would have not worried about it but it would have been there.
Admin  
#2 Posted : 06 August 2007 19:14:00(UTC)
Rank: Guest
Admin

Posted By mdg
try carrying out a percolation test to see what the natural drainage is like
Admin  
#3 Posted : 06 August 2007 21:30:00(UTC)
Rank: Guest
Admin

Posted By martin gray1
My personal experience keep digging! (safely)
MG
Admin  
#4 Posted : 06 August 2007 22:47:00(UTC)
Rank: Guest
Admin

Posted By jiboom
thanks for the replies. I'm thinking the inspector should not have passed this until it was at the required depth. What happens if this layer is very thick? Will i have to keep going down or can anything be done to help?

how easy is it to do the test? From this would i be able to tell me how far down to go? I read about this test but several builders told me 5ft down would be plenty. If they had said 4'11 i would not have hit this and would have been fine??
Admin  
#5 Posted : 07 August 2007 09:12:00(UTC)
Rank: Guest
Admin

Posted By Descarte
get some rigid plastic tubing and cut in half along the vertical not the horizontal, tape back together and hammer into ground, wiggle and wobble then pull out, split the 2 halfs and you will have your very own earth core which will show you where the clay layer extends too.

your local water authority may have some extra advice or guidance for you if you come up with any problems
Users browsing this topic
Guest (3)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.