Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 21 January 2008 17:04:00(UTC)
Rank: Guest
Admin

Posted By Elliot Morton
Hi

Is there a maximum height a fire extinguisher may be fitted to a wall (floor to handle)

Thanks

Elliot
Admin  
#2 Posted : 21 January 2008 17:12:00(UTC)
Rank: Guest
Admin

Posted By Jon H
Hi Elliot, this is from the governments fire safety risk assessment guide - available fro free download.
http://www.communities.g...ocuments/fire/pdf/151543

Section 3 - page 58

Where the fire risk is not confined to a
particular location, e.g. Class A fires, the fire
extinguishers should be positioned on escape
routes, close to the exit from the room or floor,
or the final exit from the building. Similarly,
where the particular fire risk is specifically
located, e.g. flammable liquids, the appropriate
fire extinguisher should be near to the hazard,
and located so that it can be safely used. They
should be placed on a dedicated stand or hung
on a wall at a convenient height so that
employees can easily lift them off (at about 1m
for larger extinguishers, 1.5m for smaller ones,
to the level of the handle). Ideally no one
should have to travel more than 30m to reach
a fire extinguisher. If there is a risk of malicious
use you may need to use alternative, and more
secure, locations.

Hope this helps.

Jon
Admin  
#3 Posted : 22 January 2008 08:22:00(UTC)
Rank: Guest
Admin

Posted By Bob Youel

whilst height figures are given these should be looked at with regards to who would be working there e.g. are they exceptionally small / tall; as an extinguisher should be easily accessible to all that are present

This has been an issue in one place [theater] that I worked
Admin  
#4 Posted : 22 January 2008 11:30:00(UTC)
Rank: Guest
Admin

Posted By Ashley Wood
The recommendation is 1000mm from floor to top of handle for water, foam, 5kg Co2 and 1400mm for Co2 -3kg.

However, as pointed out consider the ability of the user as they will have to lift the full weight to clear the bracket holding the extinguisher.
Admin  
#5 Posted : 23 January 2008 08:36:00(UTC)
Rank: Guest
Admin

Posted By Elliot Morton
Hi

Thank you for your info, much appreciated

regards

Elliot
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.