Rank: Guest
|
Posted By skooter1
Morning all,
Need some help on the above subject?
On our sites we employ subcontractors, who on times borrow our ladders without permission.
This isn’t a problem as they are inspected every week, but it has come to our attention that some electricians are using them.
Now I know electricians should use fibreglass ladders, but is there legislation that states this or is it just good practise.
Many thanks
Skooter1
|
|
|
|
|
|
Rank: Guest
|
Posted By Tabs
No legislation I know of, and it really shouldn't matter.
Electricians should prove that all circuitry that might be touched is isolated before they start work in that vicinity.
Exception is live work under a permit in exceptional circumstances, in which case I would suggest that step ladders are inappropriate any way.
|
|
|
|
|
|
Rank: Guest
|
Posted By skooter1
Thank you.
|
|
|
|
|
|
Rank: Guest
|
Posted By Anthony Slinger
I would be more concerned as to thier general approach to work at height.
From what you have said are you sure all the work at height is properly planned and organised?
|
|
|
|
|
|
Rank: Guest
|
Posted By Anthony Slinger
Sorry, should have also added:-
Any work on or near electrical conductors should normally be undertaken dead, however, where work is to be carried live, the conditions to be met are: -
• It is unreasonable in all the circumstances for the conductor to be dead; and
• It is reasonable in all the circumstances for the person to be at work on or near that conductor while it is live; and
• Suitable precautions (including, where necessary, the provision of personal protective equipment) have been taken to prevent injury. This might include fiberglass steps if the work at height assessment finds these are reasonably practicable
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.