Posted By Merv Newman A, LOTO - a subject which can get, justifiably, very complicated. I could do you a five page procedure if you like. Without even having to look anything up. However, the simplest (and I really do mean simplest) procedure is to have each electrical starter equipped to take a padlock. Each cleaner is issued with one padlock for each machine they may be cleaning at any one time. each padlock has a tag with name of owner, reason for lockout and instruction DO NOT START. So, before putting hands, head or other extremities inside the machine the cleaner does LOCK, TAG, CLEAR and TRY LOCK : attache the padlock to the starter. TAG : make sure tag is attached and visible. CLEAR : check at least visually that the danger area is clear of said extremities, just in case you have locked out the wrong starter. TRY : push the start button. If the machine doesn't start then you have probably got it right. Extremities may now be inserted. As said, this is a reallyreally simple procedure for a reallyreally simple machine. You may need more than the above but never less. Merv

Posted By Gus Merv is right you can make it too complicated but you can also oversimplify ( no offence intended Merv) The best step by step guide I have found and which I used as the basis for a procedure and toolbox talks is: www.hseni.gov.uk/lock_out_procedures.pdf I'm sure there are others ( though surprisingly i have never found anything on the main UK HSE website) Gus