Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
m  
#1 Posted : 16 September 2010 15:11:13(UTC)
Rank: Super forum user
m

We have a new piece of equipment that requires users to break open a glass phial and transfer the liquid using a needle and syringe, non biological. I am putting together some bullet points to train out to the users. Can any more experienced users offer any amendments or additions: • Never re-sheaf a needle • Place needles and phials single handed directly into the sharps bin when you have finished using them • Never put used or new needles or phials in the bin • Never hand an exposed needle to another person, place on table and the other picks up • Keep the other hand away from the needle • Do not overfill the sharps bin, change when ¾ full • Dispose of sharps bin as hazardous waste • Needle stick injuries must be reported as an incident • Haste causes most needle stick injuries – take your time
safetyamateur  
#2 Posted : 16 September 2010 16:09:37(UTC)
Rank: Super forum user
safetyamateur

m, couple of thoughts. Just helped with this stuff where I work. - in some cases, resheathing is used where multiple products are going in to make another product. Not a massive issue where there's low risk contaminants - go for a positive on disposal (i.e. always in appropriate receptacle) - on the 'handing to others', needs to go in a neutral space. Could be a kidney dish or some such, table might be a little prone to spillage onto floor. - sharps bins have their own fill line - not always .75 full. Mention fill line instead - add first-aid after the incident reporting
safetyamateur  
#3 Posted : 16 September 2010 16:11:48(UTC)
Rank: Super forum user
safetyamateur

Bah. Meant to mention closing the lid when not in use and keeping them off the floor to avoid spillage of used needles. If needles are found outside the wastestream then forceps are good for retrieving and putting into a sharps bin. If they get into a bag, you need to look at disposing of the entire bag as hazardous and handling being done very carefully.
Kate  
#4 Posted : 16 September 2010 16:20:29(UTC)
Rank: Super forum user
Kate

And keep the sharps bin on the bench where you will be producing the sharps!
Ken Slack  
#5 Posted : 16 September 2010 16:26:25(UTC)
Rank: Super forum user
Ken Slack

Glass vials can be more safely opened using a piece of gauze to cover the vial top and neck.
chalkleyrg  
#6 Posted : 16 September 2010 16:36:57(UTC)
Rank: Forum user
chalkleyrg

Are these ampoules with snap-off tops? If so, you can get tools for safely snapping off the top of the ampoule. For instance look at the lab supply company VWR, catalogue number ZZJE103-040 Richard
m  
#7 Posted : 17 September 2010 08:16:24(UTC)
Rank: Super forum user
m

Thanks to all for your contributions, there are some good additions to my list. The VWR tool is £180 for 50, re-usable after autoclaving. I would like to buy a smaller quantity so I will hunt around. http://uk.vwr.com/app/ca...ticle_number=ZZJE103-040
A Kurdziel  
#8 Posted : 17 September 2010 10:57:49(UTC)
Rank: Super forum user
A Kurdziel

Finally do you need a sharp needle? When I started out at our place everyone was using sharp needles even though only a minority was actually injecting anything. Always use a blunt needle if possible.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.