Rank: Forum user
|
HI,
I need some advice with regards to laser safety, we have had 2 lasers installed. The lasers will form a laser show. My concerns is that the lasers have been fitted at approximately 1 meter from the ground. When testing the show the lasers although are continuously moving are directing towards the public area. The wattage of the lasers are 3.4 & 2.8 milli watts.
I am looking at HSG 95 and see that lasers should be installed at 3 meters height. So my concern is.
At present is there a risk of laser damage to peoples eyes? I understand this is difficult to gauge without actually seeing the show but I'm no laser expert and require a little advice.
Thanks
Paul
|
|
|
|
Rank: Super forum user
|
what rating are the lasers?
|
|
|
|
Rank: Guest
|
At those energies they may be class II lasers, you will need to consider what may happen if the display stops and the beam is left facing the public.
|
|
|
|
Rank: Forum user
|
Before I retired I worked in the HE Sector and regularly had requests from the Students Union for Laser Displays in their dance hall
These requests were always refused unless they were able to demonstrate they could comply with HSG 95.
On one occasion we discovered that the calculations which had been made by the display company were incorrect and could have put the audience at risk had the show gone ahead.
The other consideration is that the natural blink reaction is decayed when alcohol is consumed.
|
|
|
|
Rank: Super forum user
|
|
|
|
|
Rank: Forum user
|
Hello there
I would ask for some further information from the Company putting on the laser show, in particular ask about how much experience they have in lasers. They should be able to provide you with some measurements they have taken and a safety plan which gives details of the different systems being used including the laser classification, the approximate distance from the audience, the wave length mesured in nm and verification of light measurements in mW. The key with laser safety is making sure that the system is safely programmed so that the beam of light is always projected above the audience heads. If the Company cannot provide you with this sort of detail I would be very wary about their competence.
It is a crazy situation but you can "dry hire" lasers without a trained operator, which is something best avoided.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.