Rank: Forum user
|
Hi all, So I found out recently that one of our drivers has - with the best of intentions - created their own sweeper for attaching to the forks of our FLT, so they can sweep our warehouse yard. I've told them to stop using it until I can risk assess it. Now, other than making sure it is of sound construction, the forks fit properly into the fork pockets (i.e. not too large that could compromise securing it) and that it can be made secure (which currently, it doesn't have, so would have to be modified) onto the forks, is there anything else I really need to consider? As far as I am concerned, it doesn't need to undergo a LOLER assessment or TE because it isn't load-bearing or lifting/lowering, it is simply an attachment that operates about a foot off the ground which just sweepes/brushes the floor. Or am I wrong? If so, why? I know we could buy one, but a) it's an added expense and b) it may not be necessary. Thoughts? Thanks.
|
|
|
|
Rank: Super forum user
|
You need to check with the FLT supplier (or rental company). Whilst it is common to see attachments on forks the primary design strength is for raising, carrying and lowering a load. When we changed rental company some years back their engineer was horified to note we had a snow plough attachment in our yard which was swiftly followed with a formal letter advising on what basis the rental contract was permitted - not keen to see the lower mast bearings damaged by running in to things.
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
You need to check with the FLT supplier (or rental company). Whilst it is common to see attachments on forks the primary design strength is for raising, carrying and lowering a load. When we changed rental company some years back their engineer was horified to note we had a snow plough attachment in our yard which was swiftly followed with a formal letter advising on what basis the rental contract was permitted - not keen to see the lower mast bearings damaged by running in to things.
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
If it’s just fixed brushes, unless got runs back nd forth doubt it would be much use! Perhaps look at consequential risks of driver being focused on the seeep and not hazards around them etc.
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked Acorns for this useful post.
|
|
|
Rank: Forum user
|
What debris are they requiring to tidy up? Can the processes that cause the waste be improved? If it gets to a point where a sweeper attachment is a preferred option of the FLT operator, does that not point to reviewing the housekeeping standards, or lack there of? What is the input form the warehouse manager / supervisor? Surely there is a housekeeping policy. In my experience FLT operators are reluctant to get out of their seats and devise all sorts of well intended excuses not to tidy up immediately after themselves. It is the department managers' responsibility to ensure housekeeping protocols are implmented and enforced. As for FLt sweeper attachments, I would not recommend their use. Paul
|
![thanks](/Themes/iosh2/heart_small.png) 1 user thanked PDarlow for this useful post.
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.