Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 10 December 2002 08:44:00(UTC)
Rank: Guest
Admin

Posted By Martin Grove I'm trying to find guidance on the minimum distance that the forks should extend into or beyond the pallet to ensure a safe lift of palletised equipment/materials. Can anyone help?
Admin  
#2 Posted : 10 December 2002 12:59:00(UTC)
Rank: Guest
Admin

Posted By Bob Matthews AIIRSM Martin, The load should normally be against the heels of the forks and and tilted back. The forks fitted should be according to the size of the pallet, ie if you are lifting a 1600mm x 1000mm pallet the forks should be no more than 1000mm as you should normally lift through the widest side of the pallet, to keep the load centre close to the heels of the forks( this is of course in a perfect World, where you would have forks of different lengths lying around waiting to be used) I hope this helps Regards Bob
Admin  
#3 Posted : 17 December 2002 15:21:00(UTC)
Rank: Guest
Admin

Posted By Ian Lumsden Martin, There should be a load centre chart on all forklift trucks that tell you the correct distance for the weight of the load that you are carrying, this will determine the distance from the heel of the forks that your load can be. Also the load should only be moved forward of the heel when taking or depositing the load, the load must then be readjusted. Regards Ian Lumsden
Admin  
#4 Posted : 24 December 2002 09:53:00(UTC)
Rank: Guest
Admin

Posted By Martin Grove Bob, Ian Thanks for the information. Key question; given that the widest side of the load is against the heel and load is within capacity of the truck, is there any guidance on how far into the load the forks should extend. Obviously the forks would need to extend beyond the load centre of gravity, but by how far?
Admin  
#5 Posted : 24 December 2002 10:36:00(UTC)
Rank: Guest
Admin

Posted By Bob Matthews AIIRSM Martin, As stated in my previous message the forks should ideally not be longer than the width of the pallet and not sticking out, so the ideal length would be the width of the pallet/load. If you had to fit short forks, then they need to be a minimum of 3/4 of the way through the pallet, any less than this and there is a risk of the load tipping over. You would also have to take into account the weight of the load if short forks were used, as the load centre would also change. I hope this helps Regards Bob
Admin  
#6 Posted : 24 December 2002 10:51:00(UTC)
Rank: Guest
Admin

Posted By Martin Grove Thanks Bob, Question answered. Have a nice christmas
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.