Rank: Guest
|
Posted By Mostafa
Hello everyone,
I have been asked to do a risk assessment for erecting fencing in close proximity to a rail way track.
The risk assessment will have to be approved by rail track before work can commence,
I would like to make sure that this is spot on as i don't want to look stupid if it was to get rejected for any reason!
so has any one every done a similar assessment ?, any specifics i should look at etc
Any advice would be much appreciated
Thanks
|
|
|
|
Rank: Guest
|
Posted By David Brede
Clearly there will be an expectation that you will be using an approved rail safe system of work to protect your workforce from rail operations so this will need to be included.
Your workforce will preferably be PTS trained or have Track Visitors permit arrangements in place if this is not the case.
Train drivers will react badly to having red vehicle lights in their line of sight so avoid that.
Otherwise it is the obvious as you would expect for working alongside traffic of any sort.
|
|
|
|
Rank: Guest
|
Posted By Raymond Rapp
Mostafa
The rail company will want assurance that you have properly identified the risk of materials, tools and people inadvertently entering the track environment. By taking into account, high winds, embankments, working at height, moving vehicles and so on. Not sure what work is taking place, but the risks should be familiar to you if it is civils, construction or refurbishment type work.
Ray
|
|
|
|
Rank: Guest
|
Posted By Raymond Rapp
David
I assumed (rightly or wrongly) that the work was not taking place in a track environment but adjacent to it eg not on NR infrastructure.
Ray
|
|
|
|
Rank: Guest
|
Posted By David Brede
Raymond,
I guess that close proximity has a lot of meanings.
If it does not require a rail safe system of work then the existence of the railway could be of no more interest than a roadway to the contractor.
|
|
|
|
Rank: Guest
|
Posted By Neil R
If your within 3 metres of the track you will need to look at employing a COSS. You could look at using a track vistor permit scheme for short term contractors too.
|
|
|
|
Rank: Guest
|
Posted By Steve
Is it the boundary fence itself you are erecting?
|
|
|
|
Rank: Guest
|
Posted By Mostafa
Hi every one,
Thanks for the responses,
Basically its a wire mesh fence which is 6 metres high. The type of fencing is ball court fencing, as it will develop into a tennis court.
The fence is going to be erected roughly 5-6 metres away from the rail track and is on flat ground. There will be trains passing through, I am not sure on the frequency yet.
There are trees in between the rail track and where the fence is to be erected.
The fence is boarder line of rail tracks land and the developers land,
Thanks
|
|
|
|
Rank: Guest
|
Posted By David Brede
If you stay inside your boundary they may forgive you any rail safe systems of work so keep the costs down without sacrificing safety.
|
|
|
|
Rank: Guest
|
Posted By steve e ashton
Mostafa:
If you are in the UK, you should be aware of the inerfaces between your activities and those of the railways - http://www.networkrail.co.uk/aspx/1538.aspx
is a good starting point for your reading.
Steve
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.