Rank: Guest 
|
Posted By Steve Conway
I am after a checklist (or suggestions) which could be used for an annual inspection/integrity test of compressed gas cylinder regulators.
Thanks Steve
|
|
|
|
|
|
Rank: Guest
|
Posted By john r sharp
Steve
I would suggest contacting the manufacturer/ supplier of your regulators and seeking advice about this: visually, you can only look at the gauges (if fitted), the threads and the general condition. The inside workings need specialist attention.
Defective regulators are normally replaced on a service exchange basis.
Ensure that you keep any records of inspections.
I found that this approach worked very well over the years.
Regards
John
|
|
|
|
|
|
Rank: Guest
|
Posted By Jane Blunt
One of the major gas suppliers runs courses in inspection of oxyacetylene equipment. This course has a very thorough section on the visual inspection of regulators, and the leak testing thereof.
Jane
|
|
|
|
|
|
Rank: Guest
|
Posted By Danny Swygart
Try BOC "Safe Under Pressure"
Danny
|
|
|
|
|
|
Rank: Guest
|
Posted By Mark Darmody
Yep, contact BOC. They deliver the British Gas Association Code of Practice 7 (Inspection Procedure for Gas Control Equpment).Duration 1 Day or at least it was !!!
Mark
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.