Rank: Guest 
|
Posted By Shane Johnston
Do any of you conduct the fit test on disposable masks (FFP1) as required by the COSHH Regs ?
Considering that these are disposable, and may be replace several times throughout the day, do you repeat the test each time the mask is changed?
Can anyone explain how an FFP1 mask, filtering down to about 5 microns, can be tested. NaCl test is pointless as the NaCl particles are about 3 microns and will therefore pass through the filter media, same goes for any gas based test. What do you test disposable masks with and what is the particle size (how can you ensure that the particles are not just passing through the filter media, rather than testing the face seal).
Shane.
|
|
|
|
|
|
Rank: Guest
|
Posted By Paul Leadbetter
Shane
A full fit test does not have to be done every time the mask is changed (although the wearer will need to ensure that the mask is fitted correctly).
If you are using one of the proprietary fit testing kits, check with the supplier about using an appropriate particle size for the test.
Have you seen the HSE guidance on fit testing? If not, search for it on their website (it is an Adobe Acrobat file which can be downloaded).
Paul
|
|
|
|
|
|
Rank: Guest
|
Posted By Danny Swygart
3M have a very useful helpline for RPE and should be able to answer your questions.
You can also get some freebies.
Ring 0870 60 800 60 from the UK.
Regards,
Danny.
|
|
|
|
|
|
Rank: Guest
|
Posted By Jay Joshi The HSE document is Information Document HSE 282/28-"FIT TESTING OF RESPIRATORY PROTECTIVE EQUIPMENT FACEPIECES" ion the website:- http://www.hse.gov.uk/pubns/asbestos.pdf(disregard the reference to asbestos in the address line !!)
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.