Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 03 March 2005 17:27:00(UTC)
Rank: Guest
Admin

Posted By Spire Safety I am looking at having all the hand tools tested for safe usage times to come in line with the physical agents directive. I am health and safety adviser to a small/medium construction company and require this done in order to get local government contracts and comply with their health and safety policy, as well as to comply with regulations. Does anyone know how much it would cost to test aproximately 100 hand tools, as I have been quoted between £50-£75 per tool. Is this over the top?
Admin  
#2 Posted : 07 March 2005 08:52:00(UTC)
Rank: Guest
Admin

Posted By Ian Clay1 charges can vary from £40 to £75 per tool. I have seen some charge in excess of £100.
Admin  
#3 Posted : 07 March 2005 09:18:00(UTC)
Rank: Guest
Admin

Posted By Emma Forbes I charge only £45 per hour!! I think it's time we revised our prices then!
Admin  
#4 Posted : 07 March 2005 09:22:00(UTC)
Rank: Guest
Admin

Posted By Graham Findlay Our local Builders Equipment centre in Norwich recently quoted me approximately £3 - £5 per item. Perhaps you ought to try BE in your area, or equivalent suppliers, as there are obviously cheaper solutions out there! Graham Findlay
Admin  
#5 Posted : 07 March 2005 09:35:00(UTC)
Rank: Guest
Admin

Posted By Emma Forbes Better still - go on the training, buy the equipment and do it yourself and hire yourself out at those ridiculous prices!
Admin  
#6 Posted : 07 March 2005 14:42:00(UTC)
Rank: Guest
Admin

Posted By Sylvia Tyler Contact the manufacturers and suppliers of the tools you have. GAP produced a chart last year - but it was based on the 2.8m/s daily exposure level not the revised 5m/s. They may have upgraded it now. You are best to try and assess the average weighted acceleration of the tool - as indiviudal assessments will always be out of date as it depends on an individual's grip, the material be worked on, being reasonably practicable is the only way to address this. The HSE code of practice is very short on practical advice so a rough assessment is all that can be used. If any indiviudal is using equipment daily all day - that's when I would get the personal dose metres in. Sylvia
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.