Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 11 May 2005 12:14:00(UTC)
Rank: Guest
Admin

Posted By ScottCan I'm looking for a bit of clarification if possible. I vaguely recall reading somewhere that Fixed Electrical Wiring must be tested every 5 years. Is that ACOP, Regulation, or just a proactive approach?
Admin  
#2 Posted : 11 May 2005 12:20:00(UTC)
Rank: Guest
Admin

Posted By Linda Crossland-Clarke Hi Its recommended by the NIECEI (or what ever the initails are - mental block) people, 5 years for office type premises, 2 for commercial/industrial units. I think. Some one correct me if I'm wrong. Linda
Admin  
#3 Posted : 11 May 2005 12:33:00(UTC)
Rank: Guest
Admin

Posted By ScottCan Fantastic, we are office with warehouse, so I believe the 5 years would apply. Good to know that I didn't pull it out of the air. Thanks.
Admin  
#4 Posted : 11 May 2005 12:38:00(UTC)
Rank: Guest
Admin

Posted By Kelvin George Hi It is clearly stated in the IEE book BS1761 the times required by law , which unfortunately I don,t have to hand. You could try and ask on Screwfix Electrical forum for an answer as any electrician will have the required info. Hope it helps Kelvin
Admin  
#5 Posted : 11 May 2005 12:55:00(UTC)
Rank: Guest
Admin

Posted By Geoff Burt There aren't any specified times by law, but there are a number of recommendations for frequency. One of which is 5 years for periodic testing of a fixed installtion in a low risk environment. A straightforward warehouse with offices but no workshops, a modern electrical installation and a low risk of damp or damaged or abused or overloaded electrics, would generally be low risk.
Admin  
#6 Posted : 11 May 2005 13:15:00(UTC)
Rank: Guest
Admin

Posted By ScottCan Perfect, all that confirms my initial thoughts. Thank you kindly folks.
Admin  
#7 Posted : 11 May 2005 20:57:00(UTC)
Rank: Guest
Admin

Posted By Barry Cooper 3 years for industrial environment
Admin  
#8 Posted : 11 May 2005 21:50:00(UTC)
Rank: Guest
Admin

Posted By JohnMacCarthy25 That sounds about right. if you can get your hands on the original certificate of installations it will also state the date of retesting. Thats where I'd look first, hope that helps.
Admin  
#9 Posted : 11 May 2005 22:11:00(UTC)
Rank: Guest
Admin

Posted By Frank Hallett Evening folks. How come no-one has mentioned the electricity at Work Regs yet? The EaW require the same thing that all other H&S Regs require - a risk assessment that leads to an evaluation of what level of test at what frequency [sory about the pun] will be appropriate for your installation in your work environment. No risk assessment to defend your choice of period and type of test means that you could be deemed not to comply!! All of the other stuff is nothing but guidance - and not even HSE Guidance at that. Frank Hallett
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.