Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 03 September 2007 15:52:00(UTC)
Rank: Guest
Admin

Posted By Edward Deighan
has anyone completed a training needs analysis or risk assessments for this operation which they wouldnt mind sharing with me

many thanks

ed
Admin  
#2 Posted : 03 September 2007 16:02:00(UTC)
Rank: Guest
Admin

Posted By CFT
Would this be primarily for HPJ'ing of storm/foul and some gulley gulping thrown in? Will you also be involved in the sec 104 process prior to CCTV?

CFT
Admin  
#3 Posted : 03 September 2007 16:18:00(UTC)
Rank: Guest
Admin

Posted By Edward Deighan
Thanks

It is basically just for cleaning out gullets and storm drains etc
Admin  
#4 Posted : 03 September 2007 16:28:00(UTC)
Rank: Guest
Admin

Posted By CFT
Edward

Just create a workable method statement detailing what you will actually do in each given situation and add the RA which details the control measures you will create to address the hazards.

Most of what you will do will be fairly generic unless the situation dictates otherwise.

All the best

CFT
Admin  
#5 Posted : 09 September 2007 22:13:00(UTC)
Rank: Guest
Admin

Posted By ianmilne69
From past experience/memory, I looked at; noise, pressure at hoses (drivers always wanted to test it), other vehicles on the road (many fatalities due to that point on the roads who got scare when driving fast beahind a stopped motor), needle-stick injuries was a particular worry, leptospirosis (give masks), Hep A - C (we only gave them Hap A jabs though), ankle/trip injuries and the good old Fatigue problems.

Hope it helps. I no longer have the risk assessment as I moved from that company a couple of years agao.
Admin  
#6 Posted : 10 September 2007 09:20:00(UTC)
Rank: Guest
Admin

Posted By David Matthew
The water jetting asociation produce 2 very good publications which might be available via their website.
You also need to be careful about terminology with regard to high pressure - again see the wja publications. If it really is high pressure water jetting you will have to consider specialist PPE in the form of body and foot armour to protect against the cutting action of the water jet.
Regards
David
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.