Posted By riskybizz Is it still a requirement to use the F91 register?

Posted By graeme12345 or u could make your own up from schedule 7 in WAH regs

Posted By Kirsty Davies2 Riskybizz, F91 is not required now. In order to fulfil the requirements of Work at Height Regulations 12 & 13 as well as schedule 7, inspections can be recorded by other means ( to ensure the statutory check have been carried out). Kirsty (P.S. can you plz mail me)

Posted By riskybizz Thanks for all the helpful comments and advice, i actually have inspection report forms complying with regulation 12, the post was inspired by a third party comment made as to its "requirement" PS: Kirsty, where do i mail you to?

Posted By Ron Hunter Having looked again at the old F91A (still widely in use for 7 day scaffold inspections) and compared it with Schedule 7 of WAHR2005, I can't really see where there is a difference?

Posted By Arran Linton - Smith If I recall F91a did not meet the requirements of schedule 8 the Construction, Health, Safety and Welfare Regulations back in 1996 and that was even before the introduction of the Work at Height Regulations. Even HSG 150 published in 2001 does not make any reference to F91! There is no statutory document which replaced this document.

Posted By SNS Ron, would you be so kind as to make your layout available to me? Just sending our in-house team on refreshers / initial training for the putting up and taking down etc of tube ands clip and tower scaffolding. TIA S

Posted By Ron Hunter A kind soul has provided me with a copy of a booklet GS 0307 "Records of Reports of Inspection" which is in effect an up-to-the-minute WAHR compliant version of the old F91A. It even has the equivalent guidance that RobertK was fond of! It was the booklet format of the old F91s which made them so appealling and I'm delighted to have found this format again. Single page sheets are IMHO too easily 'lost' on Sites. The Booklet is copyright to Enfield Safety Supplies as part of their "Safepak" series and my copy here came from a local safety kit supplier. I have no interest or affiliation with Enfield. Other published documents of this type may be avialable.