Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 19 January 2009 10:08:00(UTC)
Rank: Guest
Admin

Posted By Safety officer
Can someone tell me if a statutory inspection is still required on a compressor if there is no air receiver?

Thanks
Admin  
#2 Posted : 19 January 2009 10:23:00(UTC)
Rank: Guest
Admin

Posted By holmezy
S.O,

Forgive my ignorance, but doesnt that make it just a pump? If thee is no "stored" compressed air then its not going to go pop, so little use in inspecting it?

Holmezy
Admin  
#3 Posted : 19 January 2009 10:26:00(UTC)
Rank: Guest
Admin

Posted By Safety officer
I know I wasn't sure. I wasn't sure if they have a small internal air receiver or as you say, are they just a pump.

Thanks for your help.
Admin  
#4 Posted : 19 January 2009 10:31:00(UTC)
Rank: Guest
Admin

Posted By holmezy
S.O,

even if it did have a small internal air reciever, the capacity of it would be below the threshold for inspection anyway, but I still think its a pump!!

Holmezy
Admin  
#5 Posted : 19 January 2009 12:08:00(UTC)
Rank: Guest
Admin

Posted By Brian Hagyard
Safety Officer

I would refer back to the ACOP/Guidance (don't have my copy handy and don't remember which it is) on pressure systems. I used to be involved in SCUBA diving and the compressors we used, were three phase. The internal "compression chambers" (sorry don't remember the correct term) because of the high pressure we were using (over 207bar) meant they were covered by the regs even when there is no bottle bank attached (receiver in most systems).

Having said that I doubt you will be dealing with such high pressures so your assumption that its a "pump" is probably correct.
Admin  
#6 Posted : 19 January 2009 15:10:00(UTC)
Rank: Guest
Admin

Posted By AnneWright
The answer is - it depends on the type of compressor. Just because there isnt an external receiver it doesnt mean it is just a pump.

If it is a rotary screw compressor with an internal vessel then it will come under statutory inspection.

The best thing to do is to identify the machine type by brand, model and serial number and check with the manufacturer or the British Compressed Air Society.

Admin  
#7 Posted : 24 February 2009 14:29:00(UTC)
Rank: Guest
Admin

Posted By lauramullane
Please can you advise what is included in statutory inspections/obligations - What I want to know is if the worst case senario happened on a site based on a piece of equipment - what is statutory in terms of keeping it compliant I have a list and was wondering if there is anything missing from it or is there anything there that should not be on it(Oh this is to do with schools):

Passenger lifts
Service Lift/Disabled Lift/Hoist
LEV
Fume cupboards
Pressure Vessels /Air Receivers
Window cleaning Cradles
Lifting eyes/beams
Radion
Fixed Wire Testing
Emergancy Lighting
Fire Alarm testing
Fire Fighting equipment-Extinguishers/Hydrants/Sprinklers
Legionella
Deep Clean-Kitchen
Lightning Protecton
Mansafe/fixed access equipment i.e ladders
PAT Testing
Landlords Gas
Kilns
Hot Water heating Boilers
Gas Boilers, Gas Heaters
Gym Equipment
Playground Equipment
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.