Rank: Forum user
|
Hi, can anyone point me to a regulation or best practice document that requires the winding instructions of a lift to be displayed on the wall of a lift motor room please?
Thanks.
|
|
|
|
Rank: Super forum user
|
There used to be Local Aurhority /HELA Circular HELA LAC 50/2 - Emergency release of passengers from immobilised lifts, buit it is not longer on the HSEwebsite.
The duty comes from LOLER, and good practice from relevant British/European/Industry Standards.
The key aspect is effective training and no poster with instructions can replace effective training
LOLER Regulation 5 (1)(d) Lifting equipment used for lifting persons
Every employer shall ensure that lifting equipment for lifting persons is such that a person trapped in any carrier is not thereby exposed to danger and can be freed.
Guidance to Regulation 5(1)(d)
158 An emergency means of lowering the carrier to a safe position may be
appropriate to deal with a user who has become trapped or, where this is not
possible, self-rescue equipment such as a rope ladder or an inertia reel system
could be provided. There is a need to ensure that the use of such equipment does
not make the carrier unstable thereby increasing the risk to the user. The use of
emergency lowering and self-rescue equipment may only be appropriate where
potential users have received training in its use and are competent to use it.
|
|
|
|
Rank: Forum user
|
Thanks Jay, I agree that no poster can replace training, our premises are served by very well trained personnel from the lift companies. All releases are conducted only by then. During an audit though the auditor asked where the poster was. I was unaware of any such need of a poster and wondered if I had missed a requirement.
|
|
|
|
Rank: Forum user
|
|
|
|
|
Rank: Super forum user
|
There is no legal requirement to display such a notice - especially if access to, and control of, the lift winding gear is managed to prevent un-trained persons accessing it!
A BS, is, at best, just one way of demonstrating best practice.
However, given that there are so many variations on a theme for lift winding gear, it would be very sensible to display a notice that sets out the stages for hand-winding that particular mechanism and identifies [by photo preferably] where the various controls are in that lift motor room.
Frank Hallett
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.