Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
Riddor - Failure of load bearing part
Options
Go to last post Go to first unread
Previous Topic Next Topic
John J  
#1 Posted : 21 August 2014 13:27:51(UTC)
Rank: Super forum user
John J
Scenario

Split pin and washer come off the Anchor point for a wire rope. Rope remains in position, no loss of load but a potential for the rope to slip off the anchor point.

Is this a failure of a load bearing part?
Back to top
chris42  
#2 Posted : 21 August 2014 13:31:00(UTC)
Rank: Super forum user
chris42
Don't think so, nothing actually failed did it.

Will be interesting to hear others views though.
Back to top
Steve e ashton  
#3 Posted : 21 August 2014 13:39:03(UTC)
Rank: Super forum user
Steve e ashton
My understanding would be - the split pin is not a load bearing part - it is there only to retain the load bearing part. So loss of the split pin / failure to spot the absence of the split pin is a serious defect but not reportable under RIDDOR.
Back to top
Canopener  
#4 Posted : 21 August 2014 13:42:10(UTC)
Rank: Super forum user
Canopener
I would be inclined to agree with Steve. so 'NO' !
Back to top
JJ Proudbody  
#5 Posted : 21 August 2014 13:50:20(UTC)
Rank: Forum user
JJ Proudbody
Agree, the split pin is a locking device, not load bearing.

How does a properly fitted (bent legged) split pin come out - provided the legs have been bent correctly?

Assume a conventional split pin? Like this http://www.ajreeves.com/132-split-pins-9253-p.asp

Been used a few times/legs bent straight again?
Back to top
johnmc  
#6 Posted : 21 August 2014 20:14:13(UTC)
Rank: Forum user
johnmc
I would also concur with the above, as it is not a load bearing part.
Back to top
HSSnail  
#7 Posted : 22 August 2014 08:32:12(UTC)
Rank: Super forum user
HSSnail
Everyone agreeing about a RIDDOR posting? I must still be asleep pass the coffee!
Back to top
John J  
#8 Posted : 22 August 2014 08:41:20(UTC)
Rank: Super forum user
John J
Thought I'd bring a bit of harmony to the community with something we can all agree on.

Having examined the item further the load would not have been affected (due to design and redundancy in the equipment) and their was no failure of any item.

All that said all similar hoists were taken out of use and have been checked (no issues) and a root cause analysis is being carried out.

Thanks for all the input,

John
Back to top
PIKEMAN  
#9 Posted : 22 August 2014 09:01:41(UTC)
Rank: Super forum user
PIKEMAN
Amazingly no one has said "report it to be on the safe side". IMHO and considerable experience you should NEVER do this - only report when you are certain.
Back to top
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET