Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
Element4.6 Developing or implementing a risk assessment and control strategy from design to disposal
Options
Go to last post Go to first unread
Previous Topic Next Topic
Eddy  
#1 Posted : 24 February 2015 16:07:17(UTC)
Rank: Forum user
Eddy
Folks

I am in the process of trying to complete the above element, however I am struggling with it. I have looked at the sample in the IOSH book, however Im still unsure. Is there anyone out there can give me some guidance i.e examples of what they did to complete the element. I appreciate your advice. Eddy
Back to top
kenty  
#2 Posted : 24 February 2015 19:47:48(UTC)
Rank: Forum user
kenty
Hi Eddy,

I'm looking at the same element and have roughly followed the descriptions/evidence mentioned in the table, and referenced back to the bullet pointed list.

I carried out a gap analysis against 18001, then produced a short report that i emailed to manager for review/comment. Receive comments back & draft an RA strategy document for board approval, including some recommendations. Off the back of the approved strategy document develop a training plan for the risk assessors & perhaps also plan a general awareness training session for all staff. Write a procedure (or policy) setting out the framework for conducting, monitoring and reviewing risk assessments.

Hopefully i'm on the right lines.
Back to top
bob youel  
#3 Posted : 25 February 2015 07:49:35(UTC)
Rank: Super forum user
bob youel
talk to your course provider as they should be giving advice
Back to top
kenty  
#4 Posted : 25 February 2015 08:05:41(UTC)
Rank: Forum user
kenty
Hi Bob,

Eddy's question relates to an element within the IOSH IPD process.
Back to top
Eddy  
#5 Posted : 25 February 2015 08:59:28(UTC)
Rank: Forum user
Eddy
Thanks Kenty for your reply.

Much appreciated. This is very helpful. Eddy

If you don't mind could I PM you with what I had in mind later in the week just to see if I am on the right lines and also get a second opinion from someone else.
Back to top
kenty  
#6 Posted : 25 February 2015 09:21:07(UTC)
Rank: Forum user
kenty
Fine with me.
Back to top
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET