Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Quinney21541  
#1 Posted : 07 August 2018 08:48:41(UTC)
Rank: New forum user
Quinney21541

Just a question, as I am unable to find any legis;itave information on the requirements of haveing a gas isolation switch for a static caravan, that is not used for any business purposes but family members on an irregular basis.

Can any one advise wherre if any legal requirements out there, as the gas safe engineer stated before he left on his last visit that it was a legal requirement

Thank you

Ian Bell2  
#2 Posted : 07 August 2018 09:04:54(UTC)
Rank: Super forum user
Ian Bell2

The specific requirement is probably quoted/specified in an IGEM standard (Institute of Gas Engineers and Manager)

DOn't know which one though.

Quinney21541  
#3 Posted : 07 August 2018 09:10:29(UTC)
Rank: New forum user
Quinney21541

Thank you very much for the quick responce.

Regards

chris42  
#4 Posted : 07 August 2018 09:43:14(UTC)
Rank: Super forum user
chris42

So are you saying the Gas Safe engineer left the site, leaving you with an illegal set up! But still functioning. Seems a bit odd.

Quinney21541  
#5 Posted : 07 August 2018 09:56:36(UTC)
Rank: New forum user
Quinney21541

Yes he did, however in the defence, it is not being used, and is sat empty, and fully isolated, I will be getting him back to complete all the works necessary before I let any one in there, however the reason for my question was because I needed the clarification on whether or not this is a legal/legislative requirement, based against good practice, as it is for sole/private use and not commercial .  If it is a then there is no problem about getting the works necessary done.

HSSnail  
#6 Posted : 07 August 2018 14:24:31(UTC)
Rank: Super forum user
HSSnail

How is the gas supplied? If its LPG in cylinders are there not cut off valves on the top of the bottle, or close to the bottles if more than 1. If its a piped supply i would expect a switch next to the meter similar to a house.

Quinney21541  
#7 Posted : 07 August 2018 14:40:37(UTC)
Rank: New forum user
Quinney21541

It is by a single LPG cylinder, when I bough the thing and got it certificated there was no mention of a switch,  or one already fitted, however, I do agree with you and since found out the following:

The requirements for gas installations in mobile dwellings are outlined in IGEM/G/6 - Gas in Mobile Dwellings.

 Clause 4.1.3 of the Standards states that “An ECV must be fitted as close as reasonably practicable to the point of entry to any mobile dwelling.

Note: Normally, the ECV will be located in a meter or regulator housing, for example a meter box.”

The above applies to all types of mobile dwellings including ones for personal use.

So engineer will be back to fit one.

Hope this help others in the future.

Regards

Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.