Rank: Super forum user
|
What level of training would be required if I wanted to move into this line of work. i.e. 1 day, 2day etc.. Course or would it have to be advanced.
Thanks in anticipation of your responses!
|
|
|
|
Rank: Super forum user
|
Do you mean if you wanted to move into CDM-C work? Any designer or builder of construction work is in the CDM line of work.
If you do, the specific training to be CDM-C is in my view the least significant aspect. I think APS will put you on their register after a three-day course and a multiple choice exam (something like that). I don't think that makes you a good CDM-C though - at best it lets you know what a good CDM-C needs to be.
|
|
|
|
Rank: New forum user
|
The paperwork and the exam is the easy bit to be a Good CDM Coordinator means you need a lot of both construction and people skills, not to mention a fairly extensive knowledge of H&S. Good luck as I find it a fantastic job.
|
|
|
|
Rank: Super forum user
|
My construction skills are rusty, but I'd like to think I have an extensive knowledge of health and safety.
|
|
|
|
Rank: Forum user
|
If your Construction skills are just rusty, I would suggest that reading the CDM ACOP which can be downloaded FOC from the HSE website might be enough. Otherwise you look at the NEBOSH Construction Certificate - depending on when you did previous qualifications you may only have to do the NCC 2 and the practical.
If you are looking at undertaking work as a CDM-C then look at the APS website and go on a CDM-C course, I would also further recommend you err on the side of caution and try and work alongside an experienced CDM-C on a small project first.
Hope all goes well,
Regards
Clive
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.