Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
Asbestos Enclosure - Use of Oxyacetylene Torches
Options
Go to last post Go to first unread
Previous Topic Next Topic
Admin  
#1 Posted : 07 August 2003 09:02:00(UTC)
Rank: Guest
Admin
Posted By Martyn Hilditch
Does anyone have any thoughts on the main hazards associated with the use of oxyactylene torches being used from inside an asbestos removal enclosure.

Would there be a displacement of oxygen for example?
Back to top
Admin  
#2 Posted : 07 August 2003 17:02:00(UTC)
Rank: Guest
Admin
Posted By Danny Swygart
We prefer to use "cold cutting" methods wherever possible in our asbestos facility as the fumes given off during oxy-gas cutting can affect the filters, the results of air monitoring, dry out any asbestos that has been wetted and sealed and increase and blow about any fibres in the air.

We don't use air tools for some of the same reasons.

Danny.
Back to top
Admin  
#3 Posted : 11 August 2003 10:51:00(UTC)
Rank: Guest
Admin
Posted By Tony Birchall
It may be wise to get access to portable gas detection equipment for inside and outside the enclosure.
Inspections a little while after the work has ceased also, ie don't run off site thinking that air monitoring is the only thing you need to do.
Back to top
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET