Rank: Guest
|
Posted By Declan O'Driscoll Could anybody advise me regarding the correct procedure for repairing scaffold components i.e. Welding V pressings on system scaffold, straightening bent standards etc. My main concern is the authority for the sub contracted scaffold company (not a manufactuer)to undertake these repairs.If a repaired component failed on site (How can I protect the company employing me as a Safety Consultant) I would be gratefull for any suggestions or ideas Regards
Declan.
|
|
|
|
Rank: Guest
|
Posted By John Caboche Declan, don't repair them, chuck them out. They are cheap as chips to replace. Bent poles should be cut down to a suitable straight length. Again the same applies to a system scaffold component, just bin it and replace. Any damaged component is a potential structural failure. Regards John
|
|
|
|
Rank: Guest
|
Posted By Robert.J Don't forget to record the repairs / dis-assembly / re-assembly of parts. The scaff-tag system of recording works very well.
|
|
|
|
Rank: Guest
|
Posted By Mike Miller I agree. No repaired article can ever be as safe. Would you repair or straighten a bent ladder rung? or just saw it up? Not worth the worry Destroy the parts and buy new.
Mike
|
|
|
|
Rank: Guest
|
Posted By Chris Pope Declan
This make do and mend philosophy was common years ago.
I once arranged for the aluminium hook of a roof ladder to have a welded repair by a skilled welder, who I am sure made a fairly good repair weld. It failed in service and nearly caused the death of a painter.
Regarding cold straightening of scaffold tube by the lorry mounted machine we were of the opinion that the stresses set up in the damaged tube were not relieved and that when manhandled roughly the tube would readily revert to its bent shape.
Don't repair, the material will no longer comply with the BS.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.