Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 01 October 2006 16:12:00(UTC)
Rank: Guest
Admin

Posted By P. Moore Are fire rated doors required when they would be located in/adjacent to stud partitioned offices? If the surrounding structure has no protection, is the fire door superfluous? Any advice would be appreciated.
Admin  
#2 Posted : 01 October 2006 16:34:00(UTC)
Rank: Guest
Admin

Posted By Simon Walsh Grad IOSH If I understand your question correctly, if the wall is not required to be of fire resisting standard then the door in that wall does not need to be either.
Admin  
#3 Posted : 01 October 2006 18:00:00(UTC)
Rank: Guest
Admin

Posted By Mark Ellis check with the local authority- building regulations dept you need to talk to, stud walls/partisions do provide resistance.
Admin  
#4 Posted : 01 October 2006 19:34:00(UTC)
Rank: Guest
Admin

Posted By Geoff Parkinson Another consideration is that the wall may need to be made up to a fire resisting standard as well as the doors.
Admin  
#5 Posted : 01 October 2006 20:58:00(UTC)
Rank: Guest
Admin

Posted By shaun mckeever Your information is insufficient to be able give an absolute answer. If I can give some general information it may be able to help. If the door leads directly onto a staircase then it is likely to be fire-resisting. If the door separates two different types of areas e.g. office and plant room then the door is likely to be fire-resisting. If the door leads into a corridor where there is only one direction to travel to get to an exit then it is likely to be fire-resisting. If the door is intended to be fire-resisting then the surrounding wall must also be fire-resisting otherwise you are correct, it does not serve any fire safety purpose. Fire doors are often installed in walls where there is no requirement for fire doors just because of convenience.
Admin  
#6 Posted : 01 October 2006 23:58:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor Even stud walls can be fire-resisting if required to protect an escape route, etc.
Admin  
#7 Posted : 02 October 2006 11:35:00(UTC)
Rank: Guest
Admin

Posted By holmezy Although the studded wall may not seem to be designated as fire resistant, plaster board does offer substantial resistance to fire. Try burning it.... Holmezy
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.