Rank: Guest 
|
Posted By James Midlake
All,
I have a forthcoming need for some of the team to go onto the rooves of Portacabins and shipping containers to make repairs.
The suggestion has been to wear a harness and connect to the lifting points on top of the cabins. Some of the cabins have corner points and a central point, some only corner points.
If they are connected to a corner point I am concerned that they will have a long length of lanyard behind them and in the event of a fall from the edge would simply hit the ground.
Anyone got any experience in this area? Is there any simple to erect edge system that could be used rather than the harness?
Many thanks - Midlake
|
|
|
|
|
|
Rank: Guest
|
Posted By Salus
James, go into search forums and enter "access to the roof of site offices" it may be helpful.
thread date 24.08.06
|
|
|
|
|
|
Rank: Guest
|
Posted By RP
There is a device which sits on the roof and allows a harness to be connected to it but I cannot remember the name, seen it in action tho'
|
|
|
|
|
|
Rank: Guest
|
Posted By Adrian Clifton
James
As you speak of shipping containers, I am presuming that that the floor surfaces are solid in constructon (concrete apron?).
Is there a possibility of using an aluminium scaffold tower? This would give safe access, can be located close to the repair area(s)(eliminating the need to wander across roofs from the access point). If repairs are required close to the edge, the work could be carried out from the tower or, if the repairs are within 2 metres of roof/container edges, the tower would offer edge protection. If several repairs are required to one roof/container, then the tower can be moved to the closest point of each repair (the person completing the work should descend from the roof/container after completing each repair and re-asscending when the tower has been moved to the next point).
This shoud be written as a Safe System of Work and agreed to by your operatives.
Hope this helps.
Adrian
|
|
|
|
|
|
Rank: Guest
|
Posted By Mitch
Try http://en.petzl.com/petzl/Accueil or http://www.winsafe.com/ they have some equipment solutions , this is an area I have spent a great deal of time on as we constantly access freight container roofs. We have now introduced strict working procedures and equipment to support every scenario. I would be interested in swapping notes when you have considered your best approach. Regards Mitch
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.