Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
LOLER Thorough examination and inspection - Pulley System
Options
Go to last post Go to first unread
Previous Topic Next Topic
Nivedita  
#1 Posted : 08 July 2022 11:00:47(UTC)
Rank: Forum user
Nivedita

I needed some guidance on whether a Through examination and inspection is required under LOLER for an internal Pulley system that supports a machine unit in a Solaflex Printer machine? 
Back to top
Kate  
#2 Posted : 08 July 2022 11:06:15(UTC)
Rank: Super forum user
Kate

If it is only used to support it and never to move it up and down, then technically no.

But consider the consequences if it fails.  That *might* lead you to want to get it inspected as lifting equipment anyway.
Back to top
Roundtuit  
#3 Posted : 08 July 2022 12:05:20(UTC)
Rank: Super forum user
Roundtuit

In the machine - PUWER

This would apply to "tensioner rolls" which can move up/down or arc

Handling equipment for servicing raw materials e.g. substrate rolls to the unwind stands - LOLER
Back to top
Roundtuit  
#4 Posted : 08 July 2022 12:05:20(UTC)
Rank: Super forum user
Roundtuit

In the machine - PUWER

This would apply to "tensioner rolls" which can move up/down or arc

Handling equipment for servicing raw materials e.g. substrate rolls to the unwind stands - LOLER
Back to top
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET