Rank: Forum user
|
Hi all
Thinking out loud here in readyness to join a meeting in a few weeks to discuss this topic What are our obligations from a health & safety perspective legally, by means of ventilation within the workplace a machine shop .If I have climate concerns and ventilation allegations I would take some advice on a starting point
thanks John
|
|
|
|
Rank: Super forum user
|
|
![thanks](/Themes/iosh2/heart_small.png) 4 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
|
![thanks](/Themes/iosh2/heart_small.png) 4 users thanked Roundtuit for this useful post.
|
|
|
Rank: Forum user
|
thanks for the docs appreciate you sending me the links I think when i get into this one its going to be connected to mist and vapour and the LEV controls around CNC machining, Some machines are not fully enclosed units , therefor the work area / factory is not providing clean air ???
|
|
|
|
Rank: Super forum user
|
Originally Posted by: Roundtuit ![Go to Quoted Post Go to Quoted Post](/Themes/iosh2/icon_latest_reply.gif) Ultimately temperature will be down to "majority concern" which now we have had a coupe of sunny days there is a strange absence of the usual "What is the maximum temperature" in the press.
Not so much the press but: The World Health organisation recommends a max temp of 24 degrees. I’m sure I read somewhere that after 24 degrees people start to lose concentration and work level goes down. However there is sometimes a need to be in higher than normal conditions, and you need to put measures in place to accommodate. We now appear to have more info from the op.
|
![thanks](/Themes/iosh2/heart_small.png) 1 user thanked chris42 for this useful post.
|
|
|
Rank: Super forum user
|
24C is so impracticable - there are many industries and geographies where the ambient is way above. If it were implemented you can forget dining out over summer - some commercial kitchens are 30C in the middle of winter! Then we could discuss supply chan disruption in hot industries - paper, iron, steel, cement, aluminium, plastics, chemicals, oil. Paris 2019 - 42C, London 2022 - 40C, Athens 1977 - 48C, Qatar 2010 - 50C Imagine building stadiums for three years
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
24C is so impracticable - there are many industries and geographies where the ambient is way above. If it were implemented you can forget dining out over summer - some commercial kitchens are 30C in the middle of winter! Then we could discuss supply chan disruption in hot industries - paper, iron, steel, cement, aluminium, plastics, chemicals, oil. Paris 2019 - 42C, London 2022 - 40C, Athens 1977 - 48C, Qatar 2010 - 50C Imagine building stadiums for three years
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
I think you might be right J about the risks from inadequate LEV. You need to establish( measure) what is in the aerosols and what risk it poses to workers. Remember to include the risk from any cutting fluid itself, any metal particles in the aerosol, any microorganisms that might grow in the cutting fluid, the risk from biocides that have been added to inhibit those microorganisms, plus any tramp oils that might form. Someone has to decide if they are using the right cutting oils that minimises risks to workers and if they are then, is there anything that can be done to reduce the risk eg by adding biocides or changing the cutting fluid etc. Then you look at LEV which is preferred to dilution ventilation because it gets the aerosol before people are exposed to it, and then you go to the dilution ventilation.
|
![thanks](/Themes/iosh2/heart_small.png) 1 user thanked A Kurdziel for this useful post.
|
|
|
Rank: Super forum user
|
Hi John I think this is a scenario where it might help to take yourself back in time. In ye olden days the first sections of the Factories Act 1961 (and its predecessors) dealt with issues that might be broadly described as coming under the heading "Welfare". One of those Sections was Section 4 which covered "general ventilation". Much later in the Act came Section 63 which dealt with exposure to harmful airborne contaminants. So this was where LEV and other technical controls came in. Tougher than Section 4 as it required "practicable" rather than "reasonably practicable" measures.
|
![thanks](/Themes/iosh2/heart_small.png) 1 user thanked peter gotch for this useful post.
|
|
|
Rank: New forum user
|
Originally Posted by: Roundtuit ![Go to Quoted Post Go to Quoted Post](/Themes/iosh2/icon_latest_reply.gif) Thank you very much for your sharing
|
![thanks](/Themes/iosh2/heart_small.png) 1 user thanked miajackson1117 for this useful post.
|
|
|
Rank: Super forum user
|
Well miajackson1117 I do not feel the love for people who place hidden hyperlinks in my posts - REPORTED
|
![thanks](/Themes/iosh2/heart_small.png) 6 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
Well miajackson1117 I do not feel the love for people who place hidden hyperlinks in my posts - REPORTED
|
![thanks](/Themes/iosh2/heart_small.png) 6 users thanked Roundtuit for this useful post.
|
|
|
Rank: Super forum user
|
Roundtuit- has your post been hijacked or is this just case of identity theft?
If this has triggered you, there are websites available to help you....
or you can get on with it.
|
|
|
|
Rank: Super forum user
|
AK - at a very quick glance I could buy a domain name in the British Indian Ocean Territory for just £45 for a year. xxxxxx.io
Nice discount if I wanted 5 years. Not going to look into what a "love-tester" website would be about! However, it just goes to show that these Forums are viewed from far afield, that is if "Mia" is actually in the British Indian Ocean Territory!
|
|
|
|
Rank: Super forum user
|
#15 Fortuneriches reported.
|
![thanks](/Themes/iosh2/heart_small.png) 2 users thanked chris42 for this useful post.
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.