Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
Webster Bennett Vertical Borers and Interlocks - Question about interlocking Webster Bennetts
Options
Go to last post Go to first unread
Previous Topic Next Topic
MJT110474  
#1 Posted : 22 May 2019 13:13:31(UTC)
Rank: Forum user
MJT110474

Good Afternoon,

Can anyone offer a sollution to the issue of interlocks on Webster Bennett vertical boring machines? We have 5 of these that we are mid-way through installing new guarding on, and have to have these interlocked for when the gates are open. 

The issues we have is that although 3 of these are hydraulic, the other 2 are mechanical, which means they can not stop quickly, and stopping any of these tables quickly could be disasterous for the table and the load on it. 

Any ideas? (please don't quote regulations at me, I am aware of these, but I figured that there are a lot of these machines out there and perhaps someone has already discovered a solution to the problem).

Thanks.
Back to top
Roundtuit  
#2 Posted : 22 May 2019 14:20:05(UTC)
Rank: Super forum user
Roundtuit

Timer on the interlock i.e. push stop starts a timer which is set for longer than the run down period after which the interlock releases allowing the gate to open.
Back to top
thanks 2 users thanked Roundtuit for this useful post.
CptBeaky on 23/05/2019(UTC), CptBeaky on 23/05/2019(UTC)
Roundtuit  
#3 Posted : 22 May 2019 14:20:05(UTC)
Rank: Super forum user
Roundtuit

Timer on the interlock i.e. push stop starts a timer which is set for longer than the run down period after which the interlock releases allowing the gate to open.
Back to top
thanks 2 users thanked Roundtuit for this useful post.
CptBeaky on 23/05/2019(UTC), CptBeaky on 23/05/2019(UTC)
paul.skyrme  
#4 Posted : 22 May 2019 19:38:07(UTC)
Rank: Super forum user
paul.skyrme

As has been suggested a simple request to enter function on the guard interlocks would suffice.

Just remember that the electrical safety funciton needs to be in accordance with ISO 13849-1 & validatred to -2, so that means compliance with EN 60204-1.

Your guarding will need to comply with ISO 14120 too.

It's not quite as simple as bolting guarding on remember if you are going to comply with the law.
Back to top
CptBeaky  
#5 Posted : 23 May 2019 08:06:29(UTC)
Rank: Super forum user
CptBeaky
Originally Posted by: Roundtuit Go to Quoted Post

Timer on the interlock i.e. push stop starts a timer which is set for longer than the run down period after which the interlock releases allowing the gate to open.

This is the method I have used on machinary that takes time to slow down. So I concur!
Back to top
MJT110474  
#6 Posted : 14 June 2019 07:57:43(UTC)
Rank: Forum user
MJT110474

Thanks all.
Back to top
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET