Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Carrier33701  
#1 Posted : 12 October 2020 09:06:01(UTC)
Rank: New forum user
Carrier33701

Good morning

Is there such a thing as a standard proof load factor? I have looked across the web and it seems to me that the manufacturer is able to determine their own safety factor when applying proof loads to a lifting beam ranging from 2 upto 7, is this correct or is there a recognised norm?  We normally apply a safety factor of 2 to items we design and use in house but this seems a bit "light" to me based upon what I have read so far.  Any advice greatly appreciated.

cheers

paul.skyrme  
#2 Posted : 16 October 2020 18:14:03(UTC)
Rank: Super forum user
paul.skyrme

If the product comes under the machinery directive, which some lifting equipment does, then it is likely the harmonised standard which you really should be applying if available when you CE mark the kit (if it falls under the MD) would give guidance on safety factors.

Generally, a factor of 2 was historically OK, but now this would depend on other factors as lifts have got more complex.

You need to remember also that the factor of two should apply to all applied loads.

Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.